Ceramic Tumbling Media
Ceramic Tumbling Media is ideal as a general-purpose media and can be used with almost any type of material and part shape. It is best for harder metals and plastics and for more aggressive requirements. Ceramic Tumbling Media is available from polishing to ultra-aggressive bonds.
Ceramic Tumbling Media
Ceramic tumbling media is recommended for general purpose polishing, light and heavy deburring, fast and extra fast deburring, and ultra aggressive metal removal. Ceramic media is best for harder metals such as steel and stainless steel but is also used on softer metals such as aluminum. Ceramic media is best suited for very heavy parts.
Durable, inexpensive and highly versatile, ceramic finishing media is the most common media used in mass finishing. It is manufactured in a wide variety of shapes and sizes. Ceramic finishing media is made of silica and other minerals and abrasives that are combined, formed, and fired at a high temperature, producing a very hard, cement-like product. Most ceramic preformed shapes, such as triangles, stars and ellipses, are extruded and cut to the desired length.
The density of ceramic preformed shapes is usually determined by the amount of abrasive incorporated into the mix prior to firing – the more abrasive, the higher the density. This is important because the higher the density, the more “aggressive” the ceramic media will be (faster cutting, rougher surface) and the quicker it will wear. Therefore, dense media is only practical where the objectives cannot be achieved using other methods or where the reduction in cycle time brings a greater value than the extra cost in media consumption.
Benefits
- Highly Durable
- Long Lasting
- Heavier Than Most Tumbling Media
- Fast Cutting Action
- Wide Variety of Shapes and Sizes
- Polishing to Ultra-Aggressive Bonds
- Shorter Cycle Times
- High-Value Media
Tumbling Applications
- Deburring Steel and Titanium
- Edge Rounding on Plastics and Other Materials
- Eliminating Machining Lines
- Removing Slag and Dross on Laser Cut Parts
- Forming a Radius
- Heavy and/or Large Parts Tumbling
- Polishing
Specifications
  |
|||||||||
Dimensions |
Formulations / Bonds /22° |
||||||||
|---|---|---|---|---|---|---|---|---|---|
| A | B | KP | KLC | KM | KSF | KXF | KUFX | KDF | KSC |
| Polishing (White) | Light Cutting (Tan) | General Purpose (Gray) | Fast Cutting (Gray) | Extra Fast Cutting (Tan) | Ultra Aggressive (Blue-Gray) | Dense Super Fast Cutting (Brown) | Silicon Carbide (Gray) | ||
| 1/8" | 11/32" | NS | NS | S | NS | S | NS | NS | NS |
| 5/32" | 5/16" | NS | NS | NS | NS | NS | NS | NS | NS |
| 3/16" | 3/8" | S | NS | S | S | S | NS | NS | NS |
| 1/4" | 5/8" | NS | NS | NS | NS | NS | NS | NS | NS |
| 5/16" | 5/8" | NS | NS | NS | S | NS | NS | S | NS |
| 3/8" | 5/8" | S | NS | S | NS | NS | NS | NS | S |
| 3/8" | 7/8" | NS | NS | NS | S | NS | NS | NS | NS |
| 7/16" | 7/8" | NS | NS | S | NS | NS | NS | NS | NS |
| 1/2" | 7/8" | NS | NS | S | NS | NS | NS | NS | NS |
| 5/8" | 11/8" | NS | NS | S | S | NS | NS | NS | NS |
| 5/8" | 11/2" | S | NS | S | NS | NS | NS | NS | NS |
| 7/8" | 11/2" | NS | NS | S | NS | NS | NS | NS | NS |
| 7/8" | 13/4" | NS | NS | S | NS | NS | NS | NS | NS |
| SDS |  |
|
|
|
|
|
|
|
|
|
|||||||||
Dimensions |
Formulations / Bonds / 45° |
||||||||
|---|---|---|---|---|---|---|---|---|---|
| A | B | KP | KLC | KM | KSF | KXF | KUFX | KDF | KSC |
| Polishing (White) | Light Cutting (Tan) | General Purpose (Gray) | Fast Cutting (Gray) | Extra Fast Cutting (Tan) | Ultra Aggressive (Blue-Gray) | Dense Super Fast Cutting (Brown) | Silicon Carbide (Gray) | ||
| 3/8" | 5/8" | NS | NS | S | NS | NS | NS | NS | NS |
| 5/8" | 11/8" | NS | NS | S | NS | NS | NS | NS | NS |
| SDS | |
|
|
|
|
|
|
|
|
|
|||||||||
Dimensions |
Formulations / Bonds / 60° |
||||||||
|---|---|---|---|---|---|---|---|---|---|
| A | B | KP | KLC | KM | KSF | KXF | KUFX | KDF | KSC |
| Polishing (White) | Light Cutting (Tan) | General Purpose (Gray) | Fast Cutting (Gray) | Extra Fast Cutting (Tan) | Ultra Aggressive (Blue-Gray) | Dense Super Fast Cutting (Brown) | Silicon Carbide (Gray) | ||
| 1/4" | 9/16" | NS | NS | S | NS | NS | NS | NS | NS |
| SDS | |
|
|
|
|
|
|
|
|
S = Standard stock item (50 lb minimum order)
NS = Non-Standard stock item (Due to production scheduling, this item may be in stock – Please Contact Us For Availability – If not in stock, a minimum order of 1,000 lbs is required for manufacture)
  |
||||||||||
Dimensions |
Formulations / Bonds / 22° |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| A | B | C | KP | KLC | KM | KSF | KXF | KUFX | KDF | KSC |
| Polishing (White) | Light Cutting (Tan) | General Purpose (Gray) | Fast Cutting (Gray) | Extra Fast Cutting (Tan) | Ultra Aggressive (Blue-Gray) | Dense Super Fast Cutting (Brown) | Silicon Carbide (Gray) | |||
| 3/8" | 5/8" | 7/8" | NS | NS | NS | NS | NS | NS | NS | NS |
| SDS | |
|
|
|
|
|
|
|
||
S = Standard stock item (50 lb minimum order)
NS = Non-Standard stock item (Due to production scheduling, this item may be in stock – Please Contact Us For Availability – If not in stock, a minimum order of 1,000 lbs is required for manufacture)
Angle Cut Triangles
  |
|||||||||
Dimensions |
Formulations / Bonds / 22° |
||||||||
|---|---|---|---|---|---|---|---|---|---|
| A | B | KP | KLC | KM | KSF | KXF | KUFX | KDF | KSC |
| Polishing (White) | Light Cutting (Tan) | General Purpose (Gray) | Fast Cutting (Gray) | Extra Fast Cutting (Tan) | Ultra Aggressive (Blue-Gray) | Dense Super Fast Cutting (Brown) | Silicon Carbide (Gray) | ||
| 1/4" | 3/16" | NS | NS | NS | NS | NS | NS | NS | NS |
| 1/4" | 1/4" | NS | NS | S | NS | NS | S | NS | NS |
| 3/8" | 3/16" | NS | NS | NS | NS | NS | NS | NS | NS |
| 3/8" | 1/4" | NS | NS | S | NS | NS | NS | NS | NS |
| 3/8" | 3/8" | NS | NS | S | S | NS | S | NS | NS |
| 5/8" | 3/8" | NS | NS | S | NS | NS | NS | S | NS |
| 5/8" | 5/8" | NS | NS | S | S | NS | S | NS | NS |
| 7/8" | 5/16" | NS | NS | S | NS | NS | NS | NS | NS |
| 7/8" | 3/8" | NS | NS | S | S | NS | NS | NS | NS |
| 7/8" | 7/8" | NS | NS | S | S | S | S | S | NS |
| 11/8" | 3/8" | NS | NS | S | S | NS | NS | NS | NS |
| 11/8" | 7/8" | NS | NS | S | NS | NS | NS | NS | NS |
| 11/8" | 11/8" | NS | NS | S | NS | NS | S | NS | NS |
| 13/8" | 1/2" | NS | NS | S | NS | NS | NS | NS | NS |
| 17/8" | 5/8" | NS | NS | S | NS | NS | NS | NS | NS |
| SDS | |
|
|
|
|
|
|
|
|
|
|||||||||
Dimensions |
Formulations / Bonds / 45° | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| A | B | KP | KLC | KM | KSF | KXF | KUFX | KDF | KSC |
| Polishing (White) | Light Cutting (Tan) | General Purpose (Gray) | Fast Cutting (Gray) | Extra Fast Cutting (Tan) | Ultra Aggressive (Blue-Gray) | Dense Super Fast Cutting (Brown) | Silicon Carbide (Gray) | ||
| 3/8" | 9/16" | NS | NS | NS | NS | NS | NS | NS | NS |
| SDS | |
|
|
|
|
|
|
|
|
S = Standard stock item (50 lb minimum order)
NS = Non-Standard stock item (Due to production scheduling, this item may be in stock – Please Contact Us For Availability – If not in stock, a minimum order of 1,000 lbs is required for manufacture)
Angle Cut Tristars
  |
|||||||||
Dimensions |
Formulations / Bonds / 22° |
||||||||
|---|---|---|---|---|---|---|---|---|---|
| A | B | KP | KLC | KM | KSF | KXF | KUFX | KDF | KSC |
| Polishing (White) | Light Cutting (Tan) | General Purpose (Gray) | Fast Cutting (Gray) | Extra Fast Cutting (Tan) | Ultra Aggressive (Blue-Gray) | Dense Super Fast Cutting (Brown) | Silicon Carbide (Gray) | ||
| 5/8" | 1/4" | NS | NS | S | S | NS | NS | NS | NS |
| 5/8" | 3/8" | NS | NS | NS | NS | NS | NS | NS | NS |
| 7/8" | 5/16" | NS | NS | S | S | NS | NS | NS | NS |
| 7/8" | 3/8" | NS | NS | S | S | NS | NS | NS | NS |
| 11/8" | 3/8" | NS | NS | S | S | NS | NS | NS | NS |
| 11/8" | 5/8" | NS | NS | NS | NS | NS | NS | NS | NS |
| 17/8" | 5/8" | NS | NS | NS | S | NS | NS | NS | NS |
| SDS | |
|
|
|
|
|
|
|
|
S = Standard stock item (50 lb minimum order)
NS = Non-Standard stock item (Due to production scheduling, this item may be in stock – Please Contact Us For Availability – If not in stock, a minimum order of 1,000 lbs is required for manufacture)
Cones
  |
|||||||||
Dimensions |
Formulations / Bonds |
||||||||
|---|---|---|---|---|---|---|---|---|---|
| A | B | KP | KLC | KM | KSF | KXF | KUFX | KDF | KSC |
| Polishing (White) | Light Cutting (Tan) | General Purpose (Gray) | Fast Cutting (Gray) | Extra Fast Cutting (Tan) | Ultra Aggressive (Blue-Gray) | Dense Super Fast Cutting (Brown) | Silicon Carbide (Gray) | ||
| 1/2" | 5/8" | NS | NS | S | NS | NS | NS | NS | NS |
| 3/4" | 7/8" | NS | NS | S | NS | NS | NS | NS | NS |
| 1" | 11/4" | NS | NS | S | NS | NS | NS | NS | NS |
| 13/16" | 13/16" | NS | S | S | S | NS | NS | NS | NS |
| SDS | |
|
|
|
|
|
|
|
|
S = Standard stock item (50 lb minimum order)
NS = Non-Standard stock item (Due to production scheduling, this item may be in stock – Please Contact Us For Availability – If not in stock, a minimum order of 1,000 lbs is required for manufacture)
Cylindrical Wedges
  |
|||||||||
Dimensions |
Formulations / Bonds |
||||||||
|---|---|---|---|---|---|---|---|---|---|
| A | B | KP | KLC | KM | KSF | KXF | KUFX | KDF | KSC |
| Polishing (White) | Light Cutting (Tan) | General Purpose (Gray) | Fast Cutting (Gray) | Extra Fast Cutting (Tan) | Ultra Aggressive (Blue-Gray) | Dense Super Fast Cutting (Brown) | Silicon Carbide (Gray) | ||
| 7/16" | 7/16" | NS | NS | NS | NS | NS | NS | NS | NS |
| 5/8" | 5/8" | NS | NS | S | S | NS | NS | NS | NS |
| 3/4" | 3/4" | NS | NS | S | NS | NS | NS | NS | NS |
| 1" | 1" | NS | NS | S | S | NS | NS | S | NS |
| 11/2" | 11/2" | NS | NS | S | S | NS | NS | NS | NS |
| 2" | 2" | NS | NS | NS | NS | NS | NS | NS | NS |
| SDS | |
|
|
|
|
|
|
|
|
S = Standard stock item (50 lb minimum order)
NS = Non-Standard stock item (Due to production scheduling, this item may be in stock – Please Contact Us For Availability – If not in stock, a minimum order of 1,000 lbs is required for manufacture)
  |
|||||||||
Dimensions |
Formulations / Bonds |
||||||||
|---|---|---|---|---|---|---|---|---|---|
| A | B | KP | KLC | KM | KSF | KXF | KUFX | KDF | KSC |
| Polishing (White) | Light Cutting (Tan) | General Purpose (Gray) | Fast Cutting (Gray) | Extra Fast Cutting (Tan) | Ultra Aggressive (Blue-Gray) | Dense Super Fast Cutting (Brown) | Silicon Carbide (Gray) | ||
| 1/4" | 1/16" | NS | NS | NS | NS | NS | NS | NS | NS |
| SDS | |
|
|
|
|
|
|
|
|
S = Standard stock item (50 lb minimum order)
NS = Non-Standard stock item (Due to production scheduling, this item may be in stock – Please Contact Us For Availability – If not in stock, a minimum order of 1,000 lbs is required for manufacture)
Additional Information
| Selected Package Gross Weight | 1000 lbs |
|---|
Related Products
-
Powder Finishing Compounds
$57.50 – $312.50
Carefully formulated and designed, the Powder Finishing Compounds are ideal for tumbling applications. Typically used in barrel finishing applications, the built-in ingredients keep the process clean and efficient. -
Plastic Tumbling Media
$3.27Plastic Tumbling Media is recommended for general purpose metal removal, pre-plate finishing, and moderate cutting. Plastic Tumbling Media is ideal for soft metals such as brass and aluminum or for stringy materials to avoid rolling the burr into a hole.
-
K14 Series – Heavy-Duty, Bench-Top Model, Barrel Tumbler
$5,595.00The K14 Series is our most popular Barrel Tumbler. The K14 Series is engineered to be a heavy-duty but compact, bench model barrel tumbler. Multiple barrel sizes allow for a wide variety of applications from heavy deburring to ultra-high polishing. These systems provide the versatility of a small piece of equipment with the durability of large Barrel Tumblers.