Carbon Steel Tumbling Media
Carbon Steel Tumbling Media is used for burnishing and polishing metals. The high bulk density exerts added pressure to a mass of parts producing a high shine in reduced finishing times. Carbon Steel Tumbling Media is also used for surface work-hardening.
Carbon Steel Tumbling Media
Carbon Steel Tumbling Media is used for burnishing and polishing metals. The high bulk density exerts added pressure to a mass of parts producing a high shine in reduced finishing times. Carbon Steel Tumbling Media is also used for surface work-hardening.
Benefits
- Polished Surface Finish
- Improved Wear Resistance of Parts
- Multiple Shapes and Sizes
- Long Media Lifetime
- Very High Bulk Density
- Maintains Part Dimensionality
- Short Cycle Times
Tumbling Applications
- Polishing Metals
- Surface Work-Hardening
- Increasing Wear Resistance of Parts
- Reducing Metal Porosity
- Pre-Plate Finishing to Improve Performance
- Highly Polished Finishes
Specifications
 |
 |
SDS |
Round Balls |
Diagonals |
|
|---|---|---|
| Overall Size | Overall Size (Size A x Size B x Size C) |  |
| 1/16" 3/32" 1/8" 5/32" 3/16" 7/32" 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 1" |
3/32" (.093" x .093" x .170") 1/8" (.125" x .125" x .225") 5/32" (.156" x .156" x .275") 3/16" (.187" x .187" x .325") 7/32" (.218" x .218" x .380") 1/4" (.250" x .250" x .445") 5/16" (.312" x .312" x .545") 3/8" (.375" x .375" x .655") 1/16" x 1/16" (.062" x .062" x n/a) 1/16" x 3/32" (.062" x .093" x n/a) |
|
| Round balls without flats for more critical finishing requirements. Produces the best finish. It also creates the best surface. | Beveled edges of diagonally cut ends provide effective finishing action in corners. Cylindrical body offers wide area contacts. Good burnishing action with the ability to reach corners and recesses. |
 |
  |
SDS |
Ballcones |
Pins |
|
|---|---|---|
| Overall Size (Size A x Size B x Size C) | Overall Size | |
| 1/8" (.125" x .170") 5/32" (.215" x .270") 3/16" (.270" x .300") 1/4" (.320" x .400") 5/16" (.375" x .465") |
1/16" x 9/32" 1/16" x 1/2" 3/32" x 3/8" 1/8" x 3/8" 1/8" x 1/2" 5/32" x 1/2" |
|
| This design combines the burnishing abilities of balls and cones into one scientifically proportioned shape. Good burnishing action with the ability to reach corners and recesses. | Tapering to pointed ends, pins reach into recesses and grooves, deflash through-holes and clean threaded areas. Strictly for reaching recesses. Must be mixed with other shapes to produce good results. |
 |
 |
SDS |
AbcutTM |
Cones |
|
|---|---|---|
| Overall Size (Size A x Size B x Size C) | Overall Size (Size A x Size B x Size C) | |
| 7/32" x 7/8" 5/32" x 7/8" 1/8" x 1/2" 50/50 Mixture (7/32" x 7/8" and 5/32" x 7/8") |
1/8" (.125" x .160") 3/16" (.155" x .200") 1/4" (.205" x .250") 5/16" (.265" x .315") 3/8" (.310" x .400") 1/2" (.470" x.535") 25/32" (.630" x.781") |
|
| The abrasive surface of this media puts teeth into finishing for fast, heavy deburring, burnishing and material removal. | Center flange and tapered crowns provide contact angles on curved surfaces. Small sizes are ideal for ornamental designs. |
 |
 |
SDS |
Eclipse Balls |
Ovalballs |
|
|---|---|---|
| Overall Size | Overall Size (Size A x Size B x Size C) | |
| 3/32" 1/8" 5/32" 3/16" 7/32" 1/4" 1/2" 5/8" 5/16" |
1/8" (.245" x .125") 5/32" (.320" x .156") 3/16" (.380" x .187") 1/4" (.445" x.250") 5/16" (.535" x .312") 3/8" (.310" x .400") |
|
| Round balls with slight flattening at pole ends. Precise roundness is not required for the majority of steel media finishing applications. Thus, two small flat spots at opposite poles are not objectionable. Pole-flattened balls are less expensive to manufacture and customers benefit from these economies through lower prices. | This shape introduces an oscillating motion to the finishing mass and provides more surface-to-surface contact than balls. |
 |
SDS |
|
Jewelry Mix |
||
|---|---|---|
| 40% 40% 20% |
5/32" Eclipse Balls 1/8" Diagonals 1/16" x 1/2" Pins |
|
| A balanced blend of three media shapes to provide optimal polishing action on flat areas, recesses, grooves and corners. | ||
Additional Information
| Selected Package Gross Weight | 25 lbs |
|---|
Related Products
-
Premium Ceramic Tumbling Media
$34.95 – $728.75Premium Ceramic Tumbling Media is designed for specific applications where precision deburring and polishing is required. The smaller sizes are ideal for intricate finishing jobs. Perfect for deburring and polishing in tight areas and smaller parts.
-
Stainless Steel Tumbling Media
$49.95 – $2,779.00Stainless Steel Tumbling Media is used for burnishing and polishing metals similarly to Carbon Steel Tumbling Media. Stainless Steel Tumbling Media reduces the need for rust inhibitors and limited storage requirements.
-
EV Series – Heavy-Duty Grade, Tub-Style, Floor Model, Vibratory Tumbler
$12,995.00
The EV Series is engineered for production environments and heavy usage. Multiple sizes are available with customizable sizes commonly manufactured. One of the most heavy duty vibratory systems available.